Ficus Elastica Care (Rubber Tree) – 45 Interesting Facts

If you want to give your home a classy style, the ficus elastica is the plant to have.

The gorgeous Ficus Elastica leaves are guaranteed to capture your attention, and the plant’s minimal maintenance requirements mean there’s no reason not to have one in your own home (unless you have a plant chewing pet).

Previously, the rubber produced by the Ficus elastica tree was widely utilized.

In the wild, this tree may reach a height of 50-100 feet. It is notable for its big, glossy, evergreen leaves and broad canopy.

Rubber tree growing inside has proven to be the most popular usage for these plants.

Contents hide

How To Care For Dieffenbachia

  • Bringing the plant home
  • Light conditions
  • Watering
  • Humidity and temperature
  • Cleaning
  • Fertilizing
  • Repotting
  • Soil
  • Propagation
  • Toxicity Information
  • Pests and other common issues

Types of Rubber Plants

  • Ficus elastica ‘Robusta’ is the most common variety, with large green leaves.
  • Ficus elastica ‘Tricolor’ has the same thick, leathery leaves as the common variety, but comes in a mix of three colors: green, pink, and cream.
  • Ficus elastica ‘Tineke’ has pink stems and leaves that mix dark and light green with cream.
  • Ficus elastica ‘Decora’ has large, shiny leaves that grow up to 12 inches long.
  • Ficus elastica ‘Doescheri’ has blotched leaves with pink accents on the stalks’ undersides.
  • Ficus elastica ‘Burgundy’ has dark crimson leaves that appear almost black in certain lighting.

Ficus Elastica Care (Rubber Tree)

Bringing The Plant Home

This little indoor tree has glossy leaves and an exotic look, making it an excellent accent piece.

Before taking it inside, make sure there are no pests or other issues with it. Even if it’s a resilient plant, you don’t want it to introduce unwanted pests into your home.

For the first two weeks, keep your new plant separate from the rest of your garden and keep an eye out for any signs of trouble.

Some gardeners choose to apply insecticides on their newly planted plants (natural or other). That is all up to you.

This plant has huge leaves, which makes it much easier to examine for pests.

Soil Conditions For Your Rubber Plant

Rubber plants may survive in practically any setting if the soil drains well.

However, because you will be growing the plant in a container, you should still give it the greatest start possible by planting it in a healthy soil mix.

Straight potting soil is not suggested since it might be too heavy and contain too much water, which can cause root rot.

However, if you mix in another medium, such as potting mix or peat, so that only approximately half of the soil is potting soil, it should be diluted enough to drain properly.

A rich potting mix is ideal since it drains effectively and doesn’t retain too much water, although soil can also be used.

You may always rely on the slow-release nutrients included in many potting mixes if you neglect to fertilize your Rubber Plant.

Homemade soil may be manufactured by combining equal parts peat, pine bark, and coarse sand.

One of the most essential things you can do to help your Rubber Plant grow is to make sure the soil is rich and well-drained.

Selecting Soil for Rubber Tree Plants

Rubber plants require well-drained soil to avoid root rot. The soil must be completely dry between waterings.

They do, however, operate best in soil that does not dry up quickly and has a great capacity for storing water.

Simply said, rubber plants demand continually moist but never soggy soil. 1 part peat, 1 part pine bark, and 1 part sand should be combined.

Light Does A Rubber Plant Need?

The location of your Rubber Plant is determined by the kind you are growing, as each requires a different quantity of light to thrive.

Solid-green-leaf types thrive in low-light indoor situations.

Variegated Rubber Plants look their best when placed in a location with plenty of indirect sunshine. If you place the plant in low-light conditions, much of the leaf color will disappear.

Ficus Elastica Care (Rubber Tree)

Green plants can grow in somewhat dark spaces or areas with bright, indirect light. Green or variegated plants should never be placed in areas where they will be exposed to direct sunlight, since this may result in sunburned leaves.

Rubber Plants cultivated in low light conditions generate weak, leggy stems. You can solve the problem by moving the plant to a brighter location.

When the weather warms up in the spring, you may give your Rubber Plant a break from its inside habitat by moving it to an area with partial sun to partial shade.

If the outdoor illumination is excessively bright, the plant will be injured or destroyed.

Water Requirements

Water your Rubber Plant thoroughly every time if you want it to thrive. Soak the soil until water comes from the drainage holes at the bottom of the container.

If you keep it in water for an extended period of time, it may develop root rot. After 30 minutes, remove the bottom tray and drain the water.

During the growing season, water the Rubber Plant once a week. There is a simple formula for calculating when to water:

Sprinkle some water on the top inch of soil if it seems dry to the touch.

Watering the Rubber Plant once a week is probably sufficient during the winter months when the plant is dormant and development is slow.

If the top inch of soil is dry, water it until it runs out the bottom drain holes.

For best results, use water that has been left out at room temperature overnight. The Rubber Plant may be fed with either tap water or rainwater.

Yellowing leaves indicate that a plant is not getting enough water.

Safety Considerations

After coming into touch with a rubber plant, one should always wash their hands since the milky white latex it generates might irritate the eyes and skin.

The rubber plant’s latex is dangerous, hence it should be stored carefully out of reach of both dogs and children.

Potential Pests and Diseases

While insect infestations are uncommon in rubber plants, they do occur on occasion. Aphids, spider mites, thrips, and scale are some of the most typical perpetrators.

If you see any pests on your rubber plant, use an organic or synthetic insecticide to get rid of them. To prevent pests, use horticultural oils such as neem to your plant.

Overwatering can cause root rot in rubber plants. When the leaves begin to droop or turn yellow, it is a warning that the soil needs to dry before being watered again.

How Often to Water Ficus Elastica Plant?

The most important thing you can do for your Ficus elastica is to water it properly.

Overwatering is the most prevalent reason of ficus elastica failure to flourish. Overwatering, or watering too regularly, will inevitably ruin it.

Throughout the spring and summer, rubber plants require varying watering regimes. We have what is known as the growth season throughout the warmer months of spring and summer.

Throughout the active growth season, there will be a larger demand for watering from the plant (spring to late summer).

Increased soil evaporation owing to higher temperatures will also play a role in this case.

Soak the plant once every week or two weeks, or whenever the top inch or two of soil (from your fingertip to your first knuckle) feels dry. Water thoroughly, letting any excess water to escape through the openings.

Your Rubber plant need less regular watering during the winter dormant period (once every two months is ideal). Leaves that begin to droop can be rejuvenated by wetting them again.

Temperature and Humidity

Rubber trees thrive in temperatures ranging from 10 to 29 degrees Celsius (50 and 50 degrees Fahrenheit).

This plant thrives in hotter climes because it is native to the tropics.

But don’t panic; these plants can withstand temperatures as low as 39 degrees Fahrenheit (four degrees Celsius) inside.

Plants can be protected against fast temperature drops and cold gusts, which will avoid internode stretching and leaf yellowing.

They flourish in a humid atmosphere (50-55% RH). They also do well in humidity levels that are higher or lower than the ideal range.

Plant it near other tropical plants to help keep the air dry.

Cleaning and Pruning

Rubber plants require little care. However, dust collection on the leaves is a possibility. Keep the leaves dust-free by washing them down with a moist sponge or cloth on a regular basis.

As the plant matures, you should give it lots of space to grow up and out.

Growing trees may necessitate the use of stakes or other techniques of trunk and branch support. You can tie or stake them to avoid drooping or uncontrollable growth.

Ficus Elastica Care (Rubber Tree)

You can also prune any excess limbs. As a result, the plant may create more new growth and assume a more complete shape.

To keep your plant from growing too tall, you can cut the top off. Trimming your Rubber plant is best done in the summer, but you may do it anytime you choose.

To avoid infecting your plant, make sure you use the proper cutting materials and clean them before using them.

Remember that when you cut the stems and leaves, the white, sticky sap will pour out. If you do not use gloves or wash your hands after pruning, you must disinfect the plant as well as the instruments you used.

How Often Should You Fertilize Ficus Elastica?

Throughout the growing season (spring and summer), apply fertilizer (spring, summer). When feeding houseplants or plants with leaves, no particular attention is required.

Because the frequency and amount of fertilizer required vary by brand, follow the directions on the box (or slightly less).

You should not fertilize in the dead of winter.

Furthermore, if you have recently repotted your plant into new soil, you may skip feeding it for a while because the new soil has all of the nutrients your plant need.

The container should state how long the soil nutrients will last.

How much sunlight does a Rubber Tree need?

Every day, the Rubber Tree requires six to eight hours of light.

While this species may grow in low-light circumstances, it prefers medium to bright light, preferably dazzling indirect light.

A transparent curtain draped over a window that receives direct sunshine can soften the light that comes in.

If a Rubber Tree does not receive enough sunshine, its leaves will lose their brilliant color.

How To Fertilize A Rubber Plant

Although rubber plants are not very hungry, feeding them on a daily basis during the growing season is critical to maintaining them healthy and producing those enormous, glossy leaves.

You should only fertilize your Rubber Plant during the growth season if you want it to thrive (spring and summer).

After the first frost of the season, stop fertilizing since the plant will go dormant and growth will slow dramatically.

You may assist your plants absorb nutrients by watering with a water-soluble fertilizer throughout the growing season.

To keep the Rubber Tree growing, merely apply a small amount of fertilizer once a month.

There are several feasible options accessible to you.

  • The use of slow-release granules, which are sprinkled on top of the soil in a container and then left for a few months, decreases fertilization frequency to every few months.
  • Because slow-release fertilizers are progressively released into the soil with each watering, they may be used for two to three months before needing to be reapplied. For correct usage directions, please refer to the product’s box.
  • An excellent approach is a dilute solution of a water-soluble houseplant mix. Simply pour the product into your watering can and apply as usual.
  • Indoor and outdoor plants can both benefit from the same water-soluble fertilizer mix. A diluted solution of this combination should be used to water rubber plants.

Fertilizers can cause salts to accumulate in the soil over time, needing periodic flushing to remove them.

While Rubber Plants can tolerate little salt in the air, if the soil is too salty, their leaves will burn.

When salt builds up, it is simple to remove. To flush the Rubber Plant, either move the entire container to the bathroom or kitchen sink, or take it outside if it is too large to manage indoors.

Allow the water to flow through the soil for about five minutes after adding the salts to flush them out. Return the water to its interior home once it has emptied.

Repotting your Rubber plants

Rubber plants may grow swiftly with proper ficus elastica care and the finest available circumstances.

Repotting once a year, or more regularly if they are doing well, is definitely essential as they outgrow their original pots.

Always use a pot that is somewhat larger in diameter than the one before it; a good rule of thumb is to go up by an inch.

Too much water soaking in the soil from a large container is unhealthy for the roots.

Before transplanting these Rubber plants in your outdoor garden, think twice.

While Ficus elastica is best managed as a small tree inside, in a well-kept yard, it may grow to heights of more than 30 meters.

Rubber tree roots are a widespread issue that may wreak havoc on sidewalks, streets, and even underground water and sewage systems.

Ficus Elastica Care (Rubber Tree)

Soil

Rubber trees cannot withstand prolonged submersion. Because of this, they must be planted on soil that drains fast.

Plants in pots thrive on a 50/50 mix of ordinary houseplant soil and cactus mix dirt. Mix half of the potting soil with half of the peat moss, bark, and coarse sand.

Propagation

In the spring and summer, the rubber plant may be propagated. You can use a cutting method or a stacking method.

The first way is simple: just cut a little branch (4 to 6 inches long) from a healthy rubber plant, let the sap dry for 30 minutes, and then submerge the cutting in a rooting medium.

Water the soil on a regular basis, but don’t let it become soggy, and place it in a warm spot with indirect sunlight.

A heat pack placed beneath it will keep the soil or medium warm, promoting development.

You might also experiment with air layers. Propagation from a healthy rubber plant is often advised.

Make a slit in the stem of the plant (peel it a little). Make a slit in the paper and insert a toothpick (to keep it apart).

Cover the wound with a ring of damp moss. Wrapping with plastic keeps the moisture content high. When you observe roots forming, it’s time to prune and plant the branch.

Toxicity

Remember that the milky latex that pours from the damaged stem and leaves of rubber plants is somewhat toxic to both cats and dogs if swallowed.

It is important to carefully wipe it off because it might irritate the eyes and skin if left on for too long.

Ingestion of rubber plant sap in dogs can result in gastrointestinal discomfort, including nausea, vomiting, and diarrhea.

When you notice these signs, it’s essential to take your pet to the vet.

Common Problems You Might Encounter With Ficus Elastica Care

Ficus Elastica Leaves Curling

Curled leaves can be caused by a variety of factors, the most prevalent of which are water difficulties (including overwatering, underwatering, and extremely low humidity).

If you detect any curled leaves on your plant, this might be an indicator of pests.

Ficus Elastica Drooping Leaves

If your plant is deficient in any way—water, light, nutrients, etc.—its leaves may droop as a sign.

Pests?

Mealybugs, scale, and aphids are the most common pests.

Potting And Repotting Needs

Rubber Plants in 3-gallon containers should last several years before needing to be repotted.

To keep it from tipping over, a plant that has been growing in a 1-gallon container since you brought it home from the garden center may need to be repotted into a little larger container.

Because this is taking care of the Rubber Plant, you won’t need to repot it for a few months.

When repotting, always use a slightly larger container.

Too much water in the soil as a result of planting in an overly big container may cause rot and other problems.

If the Rubber Plant’s roots begin to flow over the sides of the pot, further growth may be hampered.

Plants that are allowed to flourish in too-small pots may develop extensive root wrapping and may never achieve their full potential, regardless of whether they are subsequently placed into a larger pot.

When a plant has outgrown its container, its roots will frequently begin to peek out the bottom drain holes.

Any container will suffice for this function as long as it includes a drainage hole at the bottom.

To avoid root rot, empty the water from the pot with drain holes after watering before placing it in a decorative pot with no drain holes.

It’s vital to me that my houseplants look as wonderful as they feel, so I spend a lot of time researching and choosing the best containers for them.

Here are some of the planters that I recommend the most.

Rubber plants flourish in self-watering pots, giving them a low-maintenance indoor gardening option. The self-watering planters that I have successfully utilized in my home are mentioned below.

  • It is not necessary to be a rocket scientist to effectively pot or repot your Rubber Plant.
  • Carefully remove the Rubber Plant’s roots from its container and gently tease them apart.
  • Fill the new container with rich, well-drained potting mix to about a fourth of its volume.
  • Fill the new container to the brim with dirt and place the Rubber Plant inside. Take care not to bury it any deeper than it was in the previous container. With your hands, firmly squeeze the ground around the plant’s roots.
  • After planting, give the Rubber Plant a nice soak in water to ensure it flourishes. Fill the bottom drains with water until it runs out.
  • Find a location indoors where the Rubber Plant will receive enough of indirect sunlight.

Simply pick a container with adequate drainage and a nutrient-rich soil combination that does not retain excessive moisture.

Propagating New Plants

During the warm months of spring and summer, while your Rubber Plant is actively developing, you can establish new plants with cuttings.

Ficus Elastica Care (Rubber Tree)

Even those with no green thumbs should be able to follow the propagation processes.

  1. Using clean pruning shears, cut a 4- to 6-inch section of the branch’s tip.
  2. Remove everything but the top two or three leaves. As a result, the cutting may concentrate its efforts on creating new roots rather than new leaves.
  3. Rest the cutting for 30 minutes before repotting it to let the milky sap from the cut section to drain.
  4. Lightweight potting mix or seed-starting mixture should be used, and it should be placed in a container with a drainage hole at the bottom ranging in size from 6 inches to 1 gallon. Water is required for the soil in the container to settle.
  5. To fit the cutting’s end, make a large depression in the center of the container.
  6. A rooting hormone should be put to the cut end of the Rubber Plant cutting before planting to help it grow roots.
  7. Firm the ground around the hormone-treated end of the cutting after it has been inserted in the middle hole.
  8. Water the dirt once more until it drains out of the bottom holes. Provide a moist but not soggy soil as the cutting develops roots.
  9. The container should be put in a room with plenty of indirect sunlight.

It takes four to six weeks for a Rubber Plant cutting to root. By the third or fourth month, the roots should have developed themselves.

After establishing a root system, the cutting will not budge from the soil when touched.

Can You Grow Rubber Tree Inside?

Although rubber plants are fairly easy to care for, they do have certain unique requirements.

To thrive, they require a well-balanced habitat with plenty of sunlight, damp (but not muddy) soil, and adequate fertilizer.

It can reach a maximum height of 100 feet outside, but only 10 feet within a regular residence.

Tineke, Burgundy, Ruby, and Robusta are among of the most popular Ficus elastica varieties for indoor gardening.

All of them may thrive in your house if they get enough light, but not direct sunlight, which can harm the leaves.

How to Grow Rubber Tree Indoors

The rubber plant’s leaves have a waxy sheen and mature from a pinkish-coral to a dark, deep green.

Because the leaves of a rubber plant tend to droop as it matures, you’ll need to prop them up with a long wooden dowel (or, if you can’t find one, a bamboo stalk).

Sunlight

Rubber plants, like many other members of their genus, thrive under bright, diffuse lighting.

Morning sunlight is OK, but afternoon sunlight is too powerful and may singe the leaves, so they should be moved out of the way.

Plants that do not receive enough light become spindly, remove their lower leaves, and lose their shiny, beautiful colour.

Watering

Rubber plants flourish when misted with water rather than soaked. Furthermore, rubber plants are drought sensitive and struggle to live in dry conditions.

Before selecting whether or not to water your plant again, examine the first few inches of soil for moisture; if they are dry and crumbly, your plant needs watering.

Temperature and Humidity

These ficus trees, like others in the genus, are vulnerable to cold air drafts.

The internodes of ill plants may extend, and the leaves may become yellow, then brown, and eventually fall off.

Rubber trees thrive in temperatures ranging from 60 to 75 degrees Fahrenheit, with equal humidity levels.

If your home is frequently dry, you should acquire a humidifier to increase the humidity levels.

Ficus Elastica Care (Rubber Tree)

Fertilizer

During the growing season, apply a moderate liquid fertilizer to the plant on a regular basis. They eat a lot of food when they are healthy.

Fertilizing indoor plants too intensively may lead them to stretch or become root-bound due to excessive growth.

Potting Soil and Drainage

Rubber plants aren’t picky about the soil they grow in.

Cactus mixes are popular among indoor gardeners, but any good, fast-draining potting soil should suffice. Furthermore, rubber plants flourish in soil that is somewhat acidic.

They “devour” their soil and ultimately have their roots exposed, similar to the fiddle leaf fig tree, which they are occasionally confused for.

Simply add extra dirt to the top of your pot if this happens.

Propagating Rubber Plant

Although it is possible to produce new rubber plants from leaf cuttings, the procedure is hard and time-consuming, so most people choose to buy established plants.

Using a rooting hormone and ensuring appropriate moisture and heat are critical for good cuttings. If they don’t spread quickly, be patient.

This is due to the fact that the science is imprecise and takes time to finish.

Repotting Rubber Plant

A rubber plant can reach the ideal height in as little as one year, but it must be repotted every year until it does.

Because a huge plant may be too heavy to transport, it may be essential to remove several inches of the old potting media and replace it with fresh potting soil when repotting it.

How Often Do You Water A Rubber Plant?

Dip your finger into the soil and wait for water to run out of the bottom drain holes to see whether the top inch of soil on your Rubber Plant is dry.

Throughout the growth season, water your plants once a week (spring and summer). During the winter months, however, watering should be reduced to every other week.

Do Rubber Trees Need Direct Sunlight?

If exposed to direct sunlight, the leaves of Rubber Trees grown as houseplants might burn.

However, solid green species may flourish in low light, but variegated kinds require more light to sustain the range of colours on their leaves.

Why Are The Leaves Falling Off My Rubber Tree Plant?

A variety of environmental conditions may contribute to leaf fall. If the plant is overwatered, the leaves may fall off.

The leaves of the Rubber Plant will likewise fall if housed in a drafty room with excessively low temperatures.

Keep the plant away from drafts and at a location where the temperature stays at or above 50°F (10 degrees Celsius).

Why Is My Rubber Plant Leggy?

Rubber The plants get lanky as a result of the lack of light. Reduce the plant’s size by moving it to a brighter location and pruning its branches.

If you don’t want to bring new pests or diseases to a plant, use clean pruning tools.

Why Are My Rubber Plant’s Leaves Curling?

A variety of circumstances might cause the leaves of a Rubber Plant to dry out and harden. Curled leaves might indicate overwatering or underwatering.

Apply moisture as required until it drains through the top inch of soil and into the root zone.

Leaf curling can also be caused by a lack of humidity in the air. Remove the Rubber Plant from drafty places and spray it several times each week to maintain humidity.

Are Rubber Plants Toxic to Pets And People?

Because psoralen and the proteolytic enzyme ficin are present in all sections of the Rubber Plant, keep them away from dogs and children.

I’ve produced a list of 17 of the greatest houseplants that will not hurt your health if kept inside.

Does Rubber Come From A Rubber Plant?

Though the Rubber Plant (Ficus elastica) was once utilized to generate a lower-quality rubber product, the Para Rubber Tree (Hevea brasilienses) is currently the most significant tree species for natural rubber harvesting.

Do Rubber Trees Bloom Or Produce Fruit?

Rubber Trees yield little green fruits when grown in their native setting outside, however they do not produce fruits when kept as an indoor houseplant.

If you’re serious about keeping the health and beauty of the houseplants you’ve brought into your home, check out my recommendations for books, websites, and other items on my resource page.

Because of their huge, bright, and attractive leaves, I believe rubber plants are suitable for almost everyone.

A rubber plant would be a terrific addition to any home, so if you’re feeling inspired, you can get one right now on Amazon.

How often should you water a Rubber Tree?

Rubber trees should be watered every few weeks, with the soil allowed to dry out in between.

Choose the more frequent intervals when the plant is receiving more light, as in the spring and summer, and the less frequent ones when the plant is receiving less light, as in the fall and winter.

Ficus Elastica Care (Rubber Tree)

The leaves are curling inward or the potting mix is dry, both of which indicate that the plant needs more frequent watering.

If, on the other hand, you notice that the leaves are falling off or the potting mix is soggy, you should water less often.

Do Rubber Trees need humidity?

The Rubber Tree is unconcerned about its surroundings and thrives in even the most humid conditions.

What temperature does a Rubber Tree prefer?

It is best to keep a Rubber Tree at temperatures ranging from 65°F to 85°F (18°C-30°C); temperatures below 60°F (15°C) should be avoided. Keep in mind that it lives in a hot, humid rainforest!

How big does a Rubber Tree get?

When cultivated outdoors, this plant has the potential to reach a height of 30 feet (10 meters) and a spread of 10 feet (3.2 meters).

Even if cultivated indoors, it may grow to be quite tall—6-10 feet (2-3 meters) with proper care.

Are Rubber Trees easy to care for?

The Rubber Tree will cheerfully adapt to its surroundings in most circumstances.

Apart from ensuring that it receives adequate water and sunshine, your only other task will be to maintain it clear of any invasive pests that might harm your plant, such as scale or mealybugs.

If this is the case, the plant must be treated with horticultural (Neem) oil once a week and often wiped down.

Are Rubber Trees safe for pets?

This plant is not advised as a houseplant if you have pets due to its milky secretion. Poisoning occurs in both cats and dogs, as well as people, when consumed. Plants should be kept at a height where children and dogs cannot reach them.

Propagating Ficus Elastica

If you love your existing plant and want more of it, there are several ways to propagate it. One of the most basic ways is air layering.

Air layering is a widespread technique for propagating huge trees and other plants. A incision in the stem of the plant is required to encourage the development of new plants from damaged regions.

The last step is to cover the area with material that encourages development, such as moist moss.

Roots will not form for several weeks, however some people speed up the process by injecting rooting hormones into the site.

All of this amounts to deceiving the plant into producing extra roots or even plantlets on its trunk.

After extracting the plantlet, you can simply pot it up. If just the roots of your Ficus elastica have emerged, cut the entire top off and plant it.

The little plant will flourish, as will the mother plant, which will continue to send forth new branches and grow.

You may just trim a rubber tree anytime you need additional rubber instead of air layering.

Snip off a tiny piece of the plant, preferably one that is still pretty young and has a few leaves and visible nodes.

This should sprout roots and flourish in a week or two after being placed in water or ordinary rubber tree soil.

Buying Ficus Elastica

Many of the various varieties are cheaply priced, so you won’t have to break the bank to obtain one.

Because of their great popularity, you can generally find them in garden centers and specialized stores. Another plant that may be acquired digitally is Ficus elastica.

As previously said, it also helps that these plants are resilient and require minimal upkeep.

Long-term care for a rubber tree plant will not break the budget, and you can simply spread the delight by selling or giving away offsets.

Is Ficus Elastica Toxic To Cats And Dogs?

Rubber plant exposure may cause mild toxicity in cats and dogs. If your pet drinks any of the sap from this tree, it might become extremely sick.

Ficus Elastica Care (Rubber Tree)

If your pet enjoys chewing on grass and leaves, this is generally not something you want them to consume. If you want to locate some non-toxic choices, look at the list of houseplants that are safe for cats.

Reduced appetite, skin irritation, drooling, vomiting, and diarrhea are all signs that your pet has consumed the plants.

When considering the best approach to care for your rubber tree plant, don’t forget to consider your dogs! Keep this item out of reach of pets, such as on a high shelf or in a secured room.

Frequently Asked Questions

Are Ficus Elastica difficult to care for?

Ficus Elastica takes less care than Ficus Lyrata, its close cousin (Fiddle Leaf Fig tree).

It is not as fussy about water or light as other plants, and it adapts fast to its new surroundings. Based on our experience, we consider the difficulty of keeping this plant to be moderate.

Why are the leaves of my ficus dropping?

When this occurs, it is typically due to either over- or under-watering. The most common cause of brown, yellowed tree tips and leaf loss from lower branches is overwatering.

If the leaves are entirely yellow and some are crispy brown with no yellowing along the edges, underwatering is most likely to blame.

Always use your hands to compare the soil’s state to your diagnosis, and consider any recent therapy you may have given.

Can I place my ficus next to an AC or heating vent?

It is not advised to do so. Ficus trees and plants are sensitive to temperature fluctuations.

Humidity and warmth are also beneficial to these plants, so try your best to maintain a reasonable temperature and humidity level in the environment.

How often does my plant need to be repotted?

For smaller plants maintained on a desk, repotting should be done every 12-18 months. It is best to use a potting vessel that is 1″-2″ larger in diameter than the ultimate plant.

If you choose a pot that is significantly larger than the previous one, you risk drowning the plant’s roots.

Plants may be kept at their current size by reppotting them into the same container with fresh soil and making a few cuts to the roots and leaves.

Repotting should be done in the spring or summer, while the plant is actively developing.

Conclusion

The rubber plant (Ficus elastica) is a ficus species that grows natively exclusively in Southeast Asia’s tropics.

In its natural habitat, this fast-growing plant may reach heights of 100 feet, and its wide, oval leaves are a bright emerald green.

Because it is not the most forgiving plant, it is not the ideal choice for inexperienced gardeners.

It is most commonly cultivated as a houseplant, where it can be planted and maintained all year and its size may be kept under control.

A rubber manufacturing requires little maintenance. It requires adequate light, moisture, and heat to grow (it is a tropical plant).

Plant it in a sunny place on your home’s south or east wall, but keep it at least a few feet away from any glass windows.

Leave a Reply

Your email address will not be published. Required fields are marked *